How to convert decimal to 32-bit hex in DOS (for hexdump)?

Index > DOS > How to convert decimal to 32-bit hex in DOS (for hexdump)?

Author

Thread

FlierMate11

Joined: 13 Oct 2022
Posts: 94

FlierMate11 27 Jan 2023, 10:12

Previously, Tomasz offered his solution to me for 32-bit and 64-bit programming.

Now, I port my hexdump from Windows & Linux to DOS, but limited to 16-bit register, I cannot convert to hexadecimal value larger than 16-bit, at least I don't know how.

Code:

ConvertLongHex:     Nice code snippet by Tomasz Grysztar (flat assembler)
        xor      di,di
        mov     cx, 4
.loop1:
        rol      dx,4
        mov      si,dx
        and      si,1111b
        mov      al,[_digits+si]
        mov      [di+_hexnum],al
        inc      di
        dec      cx
        jnz      .loop1
        ret     
...
...
_hexnum   rb 4
          db '$'
_hexval   rb 2
          db '$'
_digits   db '0123456789ABCDEF'

Can someone enlighten?

This is the 32-bit hex edition:

Code:

ConvertLongHex:     Nice code snippet by Tomasz Grysztar (flat assembler)
        xor      ebx,ebx
        mov     ecx, 8
.loop1:
        rol      edx,4
        mov      eax,edx
        and      eax,1111b
        mov      al,[_digits+eax]
        mov      [ebx+_hexnum],al
        inc      ebx
        dec      ecx
        jnz      .loop1
        ret

Last edited by FlierMate11 on 27 Jan 2023, 10:17; edited 1 time in total

27 Jan 2023, 10:12

FlierMate11

Joined: 13 Oct 2022
Posts: 94

FlierMate11 27 Jan 2023, 10:13

Example output of my hexdump (almost finished except the hexadecimal conversion part, because 16-bit offset only)

Code:

0000  4D 5A 41 00 02 00 01 00 02 00 1F 00 FF FF 32 00   MZA...........2.
0010  00 01 00 00 00 00 00 00 1C 00 00 00 01 00 00 00   ................
0020  B8 1A 00 8E D8 FC 26 0F B6 0E 80 00 26 8D 3E 81   ......&.....&.>.
0030  00 8D 36 81 00 83 F9 00 0F 84 F2 00 26 8A 05 3C   ..6.........&..<
0040  20 75 07 3C 0D 74 09 47 EB F2 88 04 46 47 E2 EC    u.<.t.G....FG..

27 Jan 2023, 10:13

revolution
When all else fails, read the source

Joined: 24 Aug 2004
Posts: 19256
Location: In your JS exploiting you and your system

revolution 27 Jan 2023, 10:26

Not enough room for 8 characters.

FlierMate11 wrote:

Code:

_hexnum   rb 4

27 Jan 2023, 10:26

FlierMate11

Joined: 13 Oct 2022
Posts: 94

FlierMate11 27 Jan 2023, 11:11

revolution wrote:

Not enough room for 8 characters.
FlierMate11 wrote:
Code:
_hexnum   rb 4    

Yes, I changed it.

But if I change it back to

Code:

_hexnum   rb 8

and set "mov cx, 8", this is the "32-bit" hex output (see offset):

Code:

00000000  4D 5A 41 00 02 00 01 00 02 00 1F 00 FF FF 32 00   MZA...........2.
00100010  00 01 00 00 00 00 00 00 1C 00 00 00 01 00 00 00   ................
00200020  B8 1A 00 8E D8 FC 26 0F B6 0E 80 00 26 8D 3E 81   ......&.....&.>.
00300030  00 8D 36 81 00 83 F9 00 0F 84 F2 00 26 8A 05 3C   ..6.........&..<
00400040  20 75 07 3C 0D 74 09 47 EB F2 88 04 46 47 E2 EC    u.<.t.G....FG..
00500050  B0 24 88 04 BA 81 00 B4 09 CD 21 B4 3D 30 C0 BA   .$........!.=0..
00600060  81 00 CD 21 A3 7B 00 0F 82 CC 00 B4 3F 8B 1E 7B   ...!.{......?..{
00700070  00 B9 10 00 BA 67 00 CD 21 A3 77 00 0F 82 C7 00   .....g..!.w.....
00800080  8B 0E 77 00 85 C9 0F 84 9A 00 89 0E 7D 00 8B 16   ..w.........}...
00900090  7F 00 B9 04 00 E8 F3 00 E8 D6 00 E8 BE 00 31 C9   ..............1.
00A000A0  31 D2 89 CE 8A 54 67 51 B9 02 00 E8 F2 00 E8 C7   1....TgQ........

Do you know what's wrong? Or must use two registers for it?

27 Jan 2023, 11:11

FlierMate11

Joined: 13 Oct 2022
Posts: 94

FlierMate11 27 Jan 2023, 11:17

Code:

mov     dx, [_offset]  
mov     cx, 4
call    ConvertLongHex

I forgot to post the "mov dx, [_offset]" in above.

Looks like "rol dx, 4" is the bottleneck.

Anyway, the dx can only contain 16-bit value......

27 Jan 2023, 11:17

FlierMate11

Joined: 13 Oct 2022
Posts: 94

FlierMate11 27 Jan 2023, 11:33

I think I will just publish this HEXDUMPD (for DOS version) for small files only (below 64KB) until I have better solution to support large file offset.

Thanks to @macomics and @sinsi for their help in solving command-line arguments in DOS (https://board.flatassembler.net/topic.php?t=22564&start=20), I benefited from it indirectly.

If anyone want to create polyglot EXE, can combine my Hexdump for DOS with Hexdump for Windows.

First, download "hexdumpw.asm" from :
https://board.flatassembler.net/topic.php?t=22184

Change the first line to :

Code:

format PE console on 'HEXDUMPD.EXE'

Compile my HEXDUMPD.asm (DOS), and then compile HEXDUMPW.asm (Win32), you'll now have a 2-in-1 EXE.

Can redirect to file:

Code:

hexdumpd abc.exe > b.txt

hexdumpw test.jpg > c.txt

Description:	Hexdump for DOS (for small file below 64KB)	Download
Filename:	HEXDUMPD.ASM
Filesize:	5.22 KB
Downloaded:	25 Time(s)

27 Jan 2023, 11:33

revolution
When all else fails, read the source

Joined: 24 Aug 2004
Posts: 19256
Location: In your JS exploiting you and your system

revolution 27 Jan 2023, 11:45

FlierMate11 wrote:

Do you know what's wrong? Or must use two registers for it?

No. You had only posted random snippets so no way to tell what you did.

But one thing is for sure, you don't need to use two registers if you are running the code on a 32-bit capable machine.

27 Jan 2023, 11:45

ProMiNick

Joined: 24 Mar 2012
Posts: 728
Location: Russian Federation, Sochi

ProMiNick 27 Jan 2023, 12:12

Code:

INT2HEX:
        ;in
        ;si - ptr INT 
        ;cx - size in bytes of int limited by ram occupied by [si] & [di] addressed buffers
        ;di - ptr HEX
        xor     ax, ax
        add     si, cx
       ;mov     dx, cx
        jmp     .cvt_in
    .loop:
        dec     si
        mov     al, [si]
        ror     ax, 4
        shr     ah, 4
        add     ax, $0606
        test    ah,$10
        jz      @F
        add     ah,'A'-'0'-10
      @@:
        test    al,$10
        jz      @F
        add     al,'A'-'0'-10
      @@:
        add     ax, ('0'-6)+('0'-6) shl 8
        stosw
    .cvt_in:
        dec     cx
        jnz     .loop
        mov     [di], cl
       ;sub     di, dx

27 Jan 2023, 12:12

FlierMate11

Joined: 13 Oct 2022
Posts: 94

FlierMate11 27 Jan 2023, 12:46

Thanks @ProMiNick, I am still trying to make it work.

Is the "di" register increment (cld) or decrement (std)?

I set the value as below:

Code:

mov     di, _hexnum
mov     si, _offset
mov     cx, 4

...
...
_offset   dd 0 
_hexnum   rb 8
          db '$'

Output is incorrect though:

Code:

    000000   4D 5A 41 00 02 00 01 00 02 00 1F 00 FF FF 32 00   MZA...........2.
    0000000  00 01 00 00 00 00 00 00 1C 00 00 00 01 00 00 00   ................
    0000000  B8 1A 00 8E D8 FC 26 0F B6 0E 80 00 26 8D 3E 81   ......&.....&.>.
    0000001  00 8D 36 81 00 83 F9 00 0F 84 F2 00 26 8A 05 3C   ..6.........&..<
    000000C  20 75 07 3C 0D 74 09 47 EB F2 88 04 46 47 E2 EC    u.<.t.G....FG..
    000000C  B0 24 88 04 BA 81 00 B4 09 CD 21 B4 3D 30 C0 BA   .$........!.=0..
    000000A  81 00 CD 21 A3 7B 00 0F 82 CC 00 B4 3F 8B 1E 7B   ...!.{......?..{
    000000B  00 B9 10 00 BA 67 00 CD 21 A3 77 00 0F 82 C7 00   .....g..!.w.....
    0000000  8B 0E 77 00 85 C9 0F 84 9A 00 89 0E 7D 00 8B 16   ..w.........}...
    0000006  7F 00 B9 04 00 E8 F3 00 E8 D6 00 E8 BE 00 31 C9   ..............1.
    0000009  31 D2 89 CE 8A 54 67 51 B9 02 00 E8 F2 00 E8 C7   1....TgQ........
    0000007  00 E8 AF 00 59 41 3B 0E 7D 00 72 E4 83 F9 10 72   ....YA;.}.r....r
    0000002  02 EB 11 BB 10 00 29 CB E8 98 00 E8 95 00 E8 92   ......).........
    0000002  00 4B 75 F4 E8 85 00 31 C9 31 D2 89 CE 8A 54 67   .Ku....1.1....Tg
    0000007  51 80 FA 20 72 0E 80 FA 7F 73 09 88 16 45 00 E8   Q.. r....s...E..
    0000008  8D 00 EB 08 C6 06 45 00 2E E8 83 00 59 41 3B 0E   ......E.....YA;.
    010000E  7D 00 72 D5 83 F9 10 72 02 EB 0E BB 10 00 29 CB   }.r....r......).
    010000B  E8 50 00 E8 4D 00 4B 75 F7 E8 4E 00 83 06 7F 00   .P..M.Ku..N.....
    0100000  10 E9 47 FF B4 3E 8B 1E 7B 00 CD 21 EB 29 BA 00   ..G..>..{..!.)..
    0100000  00 B4 09 CD 21 EB 20 BA 1D 00 B4 09 CD 21 BA 81   ....!. ......!..
    0100001  00 B4 09 CD 21 EB 10 BA 31 00 B4 09 CD 21 BA 81   ....!...1....!..
    0100001  00 B4 09 CD 21 EB 00 B8 00 4C CD 21 BA 62 00 E8   ....!....L.!.b..
    0100008  24 00 C3 BA 65 00 E8 1D 00 C3 BA 47 00 E8 16 00   $...e......G....
    0100000  C3 BA 4A 00 E8 0F 00 C3 BA 4F 00 E8 08 00 C3 BA   ..J......O......
    010000A  45 00 E8 01 00 C3 B4 09 CD 21 C3 31 FF C1 C2 04   E........!.1....
    0100004  89 D6 83 E6 0F 8A 44 52 88 45 4A 47 49 75 EE C3   ......DR.EJGIu..

Since I set "di" register to data segment, I change the "stosw" a litte bit:

Code:

      @@:
        add     ax, ('0'-6)+('0'-6) shl 8
        mov     [di], ax
        add     di,2

If I cannot make it work, then I will just leave it as it. Thank you.

27 Jan 2023, 12:46

ProMiNick

Joined: 24 Mar 2012
Posts: 728
Location: Russian Federation, Sochi

ProMiNick 27 Jan 2023, 12:56

mov [di], cl - I force zero termination, maybe in DOS should be '$'. by the way thou already type '$' following _hexnum after 8 bytes. just clear mine termination.

27 Jan 2023, 12:56

macomics

Joined: 26 Jan 2021
Posts: 727
Location: Russia

macomics 27 Jan 2023, 14:49

FlierMate1 wrote:

Thanks to @macomics and @sinsi for their help in solving command-line arguments in DOS

Tomasz Grysztar determines the end of the parameter string by the carriage return symbol (CR = $0D)
SOURCE/DOS/FASM.ASM:113-130

Code:

get_params:
        mov     [input_file],0
        mov     [output_file],0
        mov     [symbols_file],0
        mov     [memory_setting],0
        mov     [passes_limit],100
        mov     [definitions_pointer],predefinitions
        push    ds
        mov     ds,[psp_segment]
        mov     esi,81h
        mov     edi,params
    find_param:
        lodsb
        cmp     al,20h
        je      find_param
        cmp     al,'-'
        je      option_param
        cmp     al,0Dh

27 Jan 2023, 14:49

FlierMate11

Joined: 13 Oct 2022
Posts: 94

FlierMate11 27 Jan 2023, 16:25

macomics wrote:

FlierMate1 wrote:
Thanks to @macomics and @sinsi for their help in solving command-line arguments in DOS

Tomasz Grysztar determines the end of the parameter string by the carriage return symbol (CR = $0D)
SOURCE/DOS/FASM.ASM:113-130

Luckily I did also in my HexdumpD.asm above, I notice it too from random search on the Internet.

It works for me, yes, I think CR needs to be detected.

Below is my code modified from yours. Taken from my hexdumpd.asm:
Must put null-character also at the back of filename so that DOS interrupt AH=3dh can open ASCIIZ filename. But also put "$" so that AH=9 can print it on screen. Rolling Eyes

Code:

        movzx   cx, [es:CMD_LENGTH]
        lea     di, [es:CMD_STRING]
        lea     si, [_filename]
        cmp     cx, 0
        jz      err0
again:
        mov     al, [es:di]
        cmp     al, ' '
        jnz     continue
        inc     di
        jmp     again
continue:
        cmp     al, 13
        jz      skip
        mov     [si], al
        inc     si
        inc     di
        loop    again
skip:
        xor     al, al
        mov     [si],al
        inc     si
        mov     al, '$'
        mov     [si], al

27 Jan 2023, 16:25

< Last Thread | Next Thread >

Forum Rules:

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum